How Do I Replace a Stimulation Coil?
If a stimulation coil requires replacement, it should be disconnected and exchanged while the Apollo TMS Pro system is powered off. Always inspect the replacement coil before use and verify that it is properly connected before starting treatment.
Replace a Stimulation Coil
- Complete or stop any active treatment session.
- Turn off the Apollo TMS Pro system.
- Disconnect the stimulation coil from the system.
- Remove the existing coil according to your clinic's procedures.
- Connect the replacement coil securely to the system.
- Verify that all connections are properly seated.
- Turn the Apollo TMS Pro system back on.
- Confirm that the system recognizes the coil before starting treatment.
Before Using the Replacement Coil
Inspect the coil for:
- Visible damage
- Cracks or wear
- Damaged cables
- Loose connectors
Do not use a damaged coil.
After Replacement
Once the new coil is connected:
- Verify the coil is detected by the system
- Confirm treatment settings before use
- Perform any required safety checks according to your clinic's procedures
Troubleshooting
If the replacement coil is not recognized:
- Check the coil connection
- Ensure the system is powered on
- Reconnect the coil
- Inspect cables and connectors for damage
If the issue persists, contact your service provider or follow your organization's support procedures.