Skip to content
English
Contact us
  • There are no suggestions because the search field is empty.

How do I properly power on and shut down the SAM amplifier?

To power on the SAM amplifier, remove it from the charging station and press the control button until it flashes slowly blue. To shut it down, press and hold the same button until the light flashes quickly, then release and place the amplifier back on the charging station.

Powering On the SAM Amplifier

  1. Remove the SAM amplifier from the charging station.
  2. Place the amplifier on a stable, safe surface.
  3. Place a finger on the marked control button on the amplifier.
  4. Keep pressing until the LED flashes slowly blue.
    • A slowly flashing blue light indicates that the amplifier is switched on.
    • When connected to the system, the blue light becomes steady.

Shutting Down the SAM Amplifier

  1. Place a finger on the same marked control button on the amplifier.
  2. Keep pressing until the LED flashes quickly blue.
  3. Lift your finger from the button.
  4. The flashing stops, and the amplifier is switched off.
  5. Place the amplifier back on the charging station.

Notes and Limitations

  • The amplifier cannot be switched on while charging.
  • LED indicators communicate the current status:
    • Slow blue flashing: amplifier is switched on
    • Steady blue light: amplifier is connected
    • Fast blue flashing: amplifier is switching off
  • Always place the amplifier on the charging station after shutdown to ensure proper charging.